Yep, I agree. How quickly some people judge. I got my novice in 1961, never got on the air, got my general in 1968, now an extra. I'm totally blind, and I just can't solder that small stuff. I'm glad to pay someone else to do such things.
toggle quoted messageShow quoted text
On Sun, 3 Jun 2018, John Rickert wrote:
Hmmmmmmmmmmm. Not sure if your comment was meant to irritate. I am almost
80, have designed homing systems for torpedoes and built way more bread
board projects than most. I just want a cable and am willing to pay for
it. I don't think there is any shame in that.
On Sun, Jun 3, 2018 at 2:28 PM Teton Amateur Radio Repeater Association
(TARRA) <tarra@...> wrote:
So much for a ham radio operator if you can't make up a couple of simple
I know a lot of people use some of the Alinco mobiles and other ham
radios, I wouldn't use one for the kind of continuous duty you would have
for this kind of operation.
Mick - W7CAT
----- Original Message -----
Sent: Sunday, June 03, 2018 01:56:30 PM
Subject: Re: [IRLP] No OUTPUT to IRLP
IRLP connector pin out is covered in the Documentation, and on the wiki
Most folks make up their own cable (it is pretty easy as cables go). The
site, IRLP.net. Look at link on the left “Node Radios”
Further, there several sample radios with cabling shown on the main web
knowledge of what is needed but it sure would helpful if someone put up a
On Jun 3, 2018, at 11:43, John Rickert wrote:
I am getting ready to put together my own IRLP node. I have a general
schematic drawing or all the components and how they hook together.
best, where to get the software and how the radio connects to the computer.
It also would be very helpful to see suggestions of a radio that works
the schematic on Daves site but it's very confusing.
I apologize if this exists but I can't seem to find it. I have seen
Many thanks, John
Be sure to check out all the latest at our web site