Re: Exit Out of Boot Up

Teton Amateur Radio Repeater Association (TARRA)
 

Hello Dave,

It was a blast from the past. Had to delete "dwc_otg.speed=1" from the cmdline.txt file. It looks like everything may be up and running now. I haven't checked it this morning, but it was working okay last night, other than the keyboard issue.

Mick - W7CAT
Node 3464

----- Original Message -----
From: David Cameron - IRLP
To: IRLP@irlp.groups.io
Sent: Monday, October 14, 2019 09:06:00 AM
Subject: Re: [IRLP] Exit Out of Boot Up

> IF you are not getting a log in prompt, something in the
> /home/irlp/custom/rc.irlp or /etc/rc.local script is not "exiting".
>
> I know in the past, people have added things to this script to start at
> boot, but added them in a way that if unsuccessful, they do not properly
> exit.
>
> It could be Echolink, as that is what usually starts right after IRLP.
>
> Dave Cameron
>
> On 2019-10-13 5:06 p.m., Teton Amateur Radio Repeater Association
> (TARRA) wrote:
> > Hello Dave,
> >
> > It just goes to the Node Enabled message and then won't let me do
> > anything else. Now I have found that I can SSH into it. Trying to figure
> > out the IP address places that I need to change.
> >
> > Mick - W7CAT
> > Node 3464
> >
> > ----- Original Message -----
> > From: k9dc
> > To: IRLP@irlp.groups.io
> > Sent: Sunday, October 13, 2019 05:39:52 PM
> > Subject: Re: [IRLP] Exit Out of Boot Up
> >
> > >
> > > You shouldn’t need to stop anything. Just login on the local console
> > as root, and go from there. Nothing trying to start at boot will prevent
> > you from logging in.
> > >
> > > -k9dc
> > >
> > > > On Oct 13, 2019, at 17:00, Teton Amateur Radio Repeater Association
> > (TARRA) wrote:
> > > >
> > > > Hello,
> > > >
> > > > Trying to setup a different node since my other node has stopped
> > working. Right now I don't have a network setup and running in the node
> > setup. The node boots all the way up to the point of "Node Enabled . .
> > ." and they just stays there. How do I either stop it during the boot
> > process or get out of it when it finishes so I can work on the network
> > settings???
> > > >
> > > > Mick - W7CAT
> > > > Node 3464
> > > >
> > >
> > >
> > >
> > >
> > >
> > --
> > Untitled Document
> >
> >
>
>
>
>
--

Join IRLP@irlp.groups.io to automatically receive all group messages.