Thanks for the prod in the general direction of where I needed to go.
toggle quoted messageShow quoted text
I actually got it to work by adding this to /etc/modprobe.d/blacklist.conf
options snd-hda-intel id=HDMI,PCH index=1,0
Reboot, and now the PCH module is card 0, and IRLP is playing nice
now. Just need to tweak the audio a bit and get the equipment back to
where it needs to be, and we're back in business.
Thanks for the help.
On Thu, Apr 2, 2020 at 8:50 AM Steve Jones <email@example.com> wrote:
Looks like your audio is trying to go to the HDMI audio port on the video card. If you can disable it in bios that will make the PCH the new default. If not, you will have to create a file in /etc/modprobe.d and set the module load order to lock the cards the right way round. (check with 'cat /proc/asound/cards', IRLP uses card-0)
If you need to lock the order, use 'lspci -v | less' and make a note of the kernel modules loaded for each audio device. The modules look something like 'snd_hda_intel'.
Create '/etc/modprobe.d/audio.conf ' containing the 2 lines: (without the dashes!)
options <PCH module> index=0
options <hdmi module> index=1
save the file and reboot
From: IRLP@irlp.groups.io [mailto:IRLP@irlp.groups.io] On Behalf Of Chris Schwab
Sent: Thursday, 2 April 2020 11:18 PM
Subject: Re: [IRLP] problems with "new" install - node just quick keys & unkeys
No it's a PC that I've reused.
I do see the sound card if I run alsactl init:
Found hardware: "HDA-Intel" "Intel Haswell HDMI"
"HDA:80862807,80860101,00100000" "0x1028" "0x05c1"
Hardware is initialized using a generic method
Alsaconf shows this at select sound card:
0 HDA Intel HDMI
1 HDA Intel PCH
enter device name..
On Wed, Apr 1, 2020 at 9:39 PM David Cameron - IRLP <firstname.lastname@example.org> wrote:
Your sound card is not working. I assume this is a Pi with a USB sound
card? That is a common symptom is the sound card is not initialized
during the boot cycle.
On 2020-04-01 6:19 p.m., Chris Schwab wrote:
Getting around to rebuilding our node here that has been inactive due to
a hard drive crash a while ago, and I'm having issues with the system
keying up & sending audio.
I've ran readinput and the system is decoding everything, but when I try
to run the audio test the radio keys up for about a half a second, then
automatically unkeys. If I reboot the node PC, where there would
typically be the "IRLP Node Enabled" announcement, I get that same quick
key & unkey with no audio.
Any ideas as to what I might be missing here?
Thanks and 73,