Re: Networking failing using openvpn


Klaus Rung
 

If I update to the deb 9 will the audio announcements stop working on echolink and the other old scripts that are in the node like time etc? I would hate to break things worse than they are now. The reason for using the vpn service on these nodes is because of their internet connection being non routable.

On Wednesday, June 10, 2020, 1:04:26 p.m. EDT, David Cameron - IRLP <dcameron@...> wrote:


No, the update will have no effect on your problem. All it will do is
change the IP address reported in your error.

You should update these nodes to Debian 9 at least, and then try it with
the update openvpn.

Updating a Debian node in place is not overly complicated. Debian 7 is
no longer supported though, so the first step is not simple. There are
lots of sites online that describe the update process. Just google
"update debian 7 to 9" (or 7 to 8, then 8 to 9 etc.)

David Cameron

On 2020-06-10 9:56 a.m., Klaus Rung via groups.io wrote:
> So are you saying I should wait until the update to see if things stay
> working?
>
>
>
> On Wednesday, June 10, 2020, 12:53:38 p.m. EDT, David Cameron - IRLP
> <dcameron@...> wrote:
>
>
> Its in a comment in ipupdate, and I recently fixed the script for the
> find_best_server. It will be in the next update.
>
> I also updated the web DYNDNS timeout to 5 seconds. It is not a time
> critical piece, but adds delay into anything calling ipupdate if there
> is a DNS problem.
>
> Those errors will still exist, but it will show a different IP (which is
> valid).
>
> When the node has no internet, it will keep trying to connect, and throw
> errors when it doesn't connect.
>
> David Cameron
>
> On 2020-06-10 8:57 a.m., Ramon Gandia wrote:
>  > On my node 3288, that IP address is hard coded into
>  > ~/scripts/ipupdate
>  > ~/scripts/bind_best_server
>  >
>  > It seems that if there is poor connectivity, it defaults
>  > to that IP address.  With good connectivity, its not an
>  > issue.
>  >
>  > Was one of the reason I wanted to lengthen the timeout
>  > value in an earlier post.  However, doing so, just
>  > covers up the problem.
>  >
>  > --
>  > Ramon AL7X 3288 3289 7254
>  >
>  > On 6/10/20 6:52 AM, David Cameron - IRLP wrote:
>  >> A big problem is that the server you are showing doesn't exist any more
>  >> (142.103.194.4). We need to figure out why that is also. Somewhere,
>  >> that ip is hard coded.
>  >>
>  >> Sounds like openvpn is losing the gateway, and not able to recover.
>  >>
>  >> Dave Cameron
>  >>
>  >>
>  >>
>  >> -------- Original message --------
>  >> From: k9dc <Dave@... <mailto:Dave@...>>
>  >> Date: 6/10/20 7:27 AM (GMT-08:00)
>  >> To: IRLP@irlp.groups.io <mailto:IRLP@irlp.groups.io>
>  >> Subject: Re: [IRLP] Networking failing using openvpn
>  >>
>  >>
>  >> This is probably because your DNS 1.1.1.1 is not accessible after the
>  >> tunnel drops. With DNS dead, your node will not be able to lookup
>  >> vpn01.irlp.net.  I would suggest using your local router for DNS (not
>  >> 1.1.1.1 or other outside nameserver).  The reason is that your local
>  >> router will always work regardless of the VPN being there or not.
>  >>
>  >> I would also recommend upgrading to Debian 9 Stretch.  The version of
>  >> OpenVPN that comes with 9, is much more robust than Debian 7.
>  >>
>  >> -k9dc
>  >>
>  >>  > On Jun 10, 2020, at 10:14, Klaus Rung via groups.io
>  >> <k_rung=yahoo.com@groups.io <mailto:yahoo.com@groups.io>> wrote:
>  >>  >
>  >>  > I have a deb 7 jessie node that has the openvpn installed. The
>  >> openvpn work fine when booted and gets the 44. ip and works normally for
>  >> a day or so. When the provider releases the wan ip it appears that the
>  >> node cannot reconnect to get the 44 ip and the message in the log is
>  >>  >
>  >>  > Jun 09 2020 12:07:47 -0400 ipupdate: WARNING - Comms error to server
>  >> 142.103.194.4. Cant obtain current IP.
>  >>  > Jun 09 2020 12:15:31 -0400 ipupdate: WARNING - Comms error to server
>  >> 142.103.194.4. Cant obtain current IP.
>  >>  > Jun 09 2020 12:41:36 -0400 ipupdate: WARNING - Comms error to server
>  >> 142.103.194.4. Cant obtain current IP.
>  >>  > Jun 09 2020 12:43:46 -0400 WARNING - DNS is not setup correctly
>  >>  > Jun 09 2020 12:47:57 -0400 ipupdate: WARNING - Comms error to server
>  >> 142.103.194.4. Cant obtain current IP.
>  >>  >
>  >>  > The resolv.conf is set up to use 1.1.1.1, the same is set up in the
>  >> networking file.
>  >>  >
>  >>  > Once you reboot the pc all is good again. Is there anything I should
>  >> check or is there a solution to this. It only happens when using the
> vpn.
>  >>  >
>  >>  > Klaus
>  >>  > ve3kr
>  >>  > node 7371
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >
>  >
>  >
>
>
>


Join IRLP@irlp.groups.io to automatically receive all group messages.