1. Messages
  2. PIRLP node # 7123

Re: PIRLP node # 7123

Richard Jamison
 

David,
The internet says:

To completely disable the onboard WiFi from the firmware on the Pi3 / Pi4, add

dtoverlay=disable-wifi

in /boot/config.txt.


It looks like to stop the squelch tail from going through the node would require eliminating the squelch tail at the repeater itself.
Whatever audio/squelch tale is present from the repeater is going to go through the node.

Good luck with all.

73 from an OT, 81 year old ham
Dick

On Monday, June 20, 2022 at 08:20:32 PM EDT, David Bevington via groups.io <w6tnt@...> wrote:


Dick,
I appreciate the input thank you for taking the time to send me that info. 
When I got the node I was able to get it working Wi-Fi. I have since hooked it up via cat six Cable and don’t remember how I got it on Wi-Fi. 

The repeater and node are working great together, open for everyone in Lone Pine to use just trying to eliminate the squelch tail from being sent through IRLP node. 

Thanks again
Dave W6TNT

On Jun 20, 2022, at 1:51 PM, Richard Jamison via groups.io <jamisonrd@...> wrote:


David,
PiRLP node from Dave Cameron comes with wifi turned off.  You would have to turn it on to switch from ethenet to wifi.

As far as repeaters go, I have only indirect knowledge.  Usually one programs the repeater so that DTMF code will allow the repeater to access the node and allow connections to reflector channels or other nodes. 

Dick,
WA2QDP

On Sunday, June 19, 2022 at 03:57:03 PM EDT, David Bevington via groups.io <w6tnt@...> wrote:


Hi all,
Happy Fathers Day.

  I am running PIRLP node # 7123 I have two questions,
 
1.  I now have the node connected to the internet via cat 6 cable  and would like to know the command to turn off the wireless and where to put the command?

2.  I would also like to know if I can make it so my BridgeCom BC-50V can work with a squelch tail without sending it thru the node?

Thank you in advance.
Dave B
W6TNT
Join IRLP@irlp.groups.io to automatically receive all group messages.