Well it does say your router has a problem. You will have to fix the missing port forwards. When you set the node IP as a DMZ host, did you remove all the port forwards from the router? Perhaps they

ok i have seen the dmz on some netgear stuff not work

40 gig HD ( what command to check this) can connect to the echo ref and get audio back what gets me is that I am connected to something (status page) could it be the OS ? its just wired .. I will

no ddwrt on a pc .. had it on a linksys router before with no problems

I am going to guess at this one, and say that your hard drive is full. If this error comes up, it means the node you are trying to call does not have a key in the keyring. If the keyring is corrupted

To all IRLP group members, I'm happy to announce that there is a NBEMS digital net in Southeast Minnesota...every Thursday night starting at 8:00pm cst... At 8pm we use HF on 80 meters...but then we

As another note, I did not have this problem on the old system. Only trouble I had was if it went off for any reason, I couldn't get the machine to reboot. I tried another drive and finally

I sometimes do sleep through it, but it doesn't come back on unless I go do a hard reset. 73 Butch WA0VJR Node 3148 Wallace, ks.

are u using a netgear router? ka3vgm

Sorry, I don't recall the error exactly. No help, I know.... As I recall, as it was read to me, said invallid boot option and then 00 00/1b0. I should have had my cousin write it down exactly but he

from the irlp status page Current Node Status: Unknown for 0 days, 1 hours, 49 minutes, 51 seconds troubleshhot-irlp gives me some wired errors DNS not set corectly ports 2074 through 2090 not

Maybe a newbie question can help ;-) Isn't that the time the node is supposed to shutdown and update. Then comes back on 1 hour later? Honestly, I dont even think about my node at 4am! Maybe you

Butch wrote I tried scandisk and I don't know what happened, but the machine wouldn't boot back up. When I had my cousin look at the monitor I got an invalid boot option error and some numbers which

I can have a look, but I can guarantee that if the crash is not related to an IRLP script. If it was, it would have hung up many other systems as well. Send me the login info directly to

Did you run troubleshoot-irlp? If not, do that and tell us what it reports. su - repeater troubleshoot-irlp -k9dc

the PGP sec (key or filefile is being updated please try later is the message I get when I try to dial out thats after I log in and type reboot before that every connection times out and no one can

Yes, this is the drive I transplanted as the other pc wouldn't boot. I can do that eventually, but will have to get sighted help and I'll lose a lot of custom stuff I have such as pine. I was hoping

Is this the drive you took from another PC and transplanted? I would suggest that there is something with this hardware that the configuration from the old PC does not like. In theory, this should

As I mentioned before, when it locks up, I have no access over the network. It locked up again at four again this morning. Here is from my messages file. Aparently when it locks up, doesn't write

thanks again for your help. Jim KD8FHY