Hi Gary, Thanks for the congrats and sorry to hear about your health issues. As far as that the embedded node, you've just asked for help from the group. Maybe Dace C is watching. If anyone can

Congratulations, Phil! Hey, do you know anyone with good working knowledge of Dave’s embedded node? I bought one (slightly used one month) from a guy. It was on the air for a bit and then he lost

This weekend, 21 years ago, 6300 (formerly 630) became the first IRLP node in VK3. My own node - 6390 (639) followed in the first week of September that year. 6390 is currently offline

Hi Phil, Well said! I too have been on IRLP since 2/2/2002; originally as node 491 and then 4910. It has been a great run. I’ve had many good QSO’s on the East Coast Reflector, and many other

Congrats I have been on and some time off for over 20 years now also Keep up the great work Node 212 ( ops 2120) Richard Szajkowski VA3RZS,VA3ZJ,VE3BTE

Hear Hear, Dave, light up the candles, and we'll all fly over for your birthday and help blow them out. Cheers from Down Under VK4JKL & co LOL

Congrats. Long hauler. I brought up 2040 in September 2001 and 2053 in 2007. Dave and his crew have been a great resource. _ Cary _ VE3EV Node 2040 2053

We join you in sending our thanks to the IRLP team. Our node 7808 has been on the air since the summer of 2002. 73, Thom K7FZO-- 73 de K7FZO / Thom

Greetings, Just wanted to mention that this weekend marks my 20th anniversary with IRLP and node 5960, originally node 596. So far so good. Thanks to Dave C, Dave G and all who have helped me

Many thanks for that, the FET's tested OK, and the fault was in the cabling to the DB9, the V3 interface board was fine. I'll put the system back on test running from the local network for a

R38 has nothing to do with the PTT. It forms a voltage divider on the input of the COS detection circuit. It is shorted with the Logic select jumper. Remove or change the LOGIC SELECT jumper and

Hi All, I'm aware that the schematics for the V3 interface board seem to be unavailable, but I'm trying to trace a fault on the FET PTT output. I'm driving the PTT line on a Unilab KL470 in parallel

https://status.irlp.net/?nodeid=1041 If you turn it back on, it will show up. -k9dc

Hi David: My IRLP node 1041 located in Sicamous BC on frequency 147.540 does not appear on Canada NodeID list. Can you please help get that showing again? PS: hard drive problem which is

I had a node do something similar, and it turned out that the power supply (Wall wart) didnt fully recover. I replace the original one with a slightly up scale unit.

Unfortunately I have had this happen a few times as some of the software on the Nano SD card really does not like hard shutdowns. After sending the node back to Mark for a new image and testing, I

We had an hours-long power failure and after the juice came back on my IRLP Nano-Node seems to have an issue fully rebooting and is just displaying LOADING SYSTEM... I was able to control the node

Hello I'm KA3TKW Tom in Harrisburg pa. If anyone is interested in joining us Weds evenings at 8 pm est on the 9204 reflector you are welcome to join us. I run a fun digital trivia net where I ask

That’s simple , he would have to port forward the new port through his router , once done then you should connect Richard Szajkowski VA3RZS,VA3ZJ,VE3BTE

Hi Dave, I did think of the router after the event! The Node is about 100km away I think someone will be there over the weekend (it's in the Radio Clubrooms) so hopefully they'll be able to port