Topics

Exit Out of Boot Up

Teton Amateur Radio Repeater Association (TARRA)
 

Hello Dave,

It was a blast from the past. Had to delete "dwc_otg.speed=1" from the cmdline.txt file. It looks like everything may be up and running now. I haven't checked it this morning, but it was working okay last night, other than the keyboard issue.

Mick - W7CAT
Node 3464

----- Original Message -----
From: David Cameron - IRLP
To: IRLP@irlp.groups.io
Sent: Monday, October 14, 2019 09:06:00 AM
Subject: Re: [IRLP] Exit Out of Boot Up

> IF you are not getting a log in prompt, something in the
> /home/irlp/custom/rc.irlp or /etc/rc.local script is not "exiting".
>
> I know in the past, people have added things to this script to start at
> boot, but added them in a way that if unsuccessful, they do not properly
> exit.
>
> It could be Echolink, as that is what usually starts right after IRLP.
>
> Dave Cameron
>
> On 2019-10-13 5:06 p.m., Teton Amateur Radio Repeater Association
> (TARRA) wrote:
> > Hello Dave,
> >
> > It just goes to the Node Enabled message and then won't let me do
> > anything else. Now I have found that I can SSH into it. Trying to figure
> > out the IP address places that I need to change.
> >
> > Mick - W7CAT
> > Node 3464
> >
> > ----- Original Message -----
> > From: k9dc
> > To: IRLP@irlp.groups.io
> > Sent: Sunday, October 13, 2019 05:39:52 PM
> > Subject: Re: [IRLP] Exit Out of Boot Up
> >
> > >
> > > You shouldn’t need to stop anything. Just login on the local console
> > as root, and go from there. Nothing trying to start at boot will prevent
> > you from logging in.
> > >
> > > -k9dc
> > >
> > > > On Oct 13, 2019, at 17:00, Teton Amateur Radio Repeater Association
> > (TARRA) wrote:
> > > >
> > > > Hello,
> > > >
> > > > Trying to setup a different node since my other node has stopped
> > working. Right now I don't have a network setup and running in the node
> > setup. The node boots all the way up to the point of "Node Enabled . .
> > ." and they just stays there. How do I either stop it during the boot
> > process or get out of it when it finishes so I can work on the network
> > settings???
> > > >
> > > > Mick - W7CAT
> > > > Node 3464
> > > >
> > >
> > >
> > >
> > >
> > >
> > --
> > Untitled Document
> >
> >
>
>
>
>
--

David Cameron - IRLP
 

IF you are not getting a log in prompt, something in the /home/irlp/custom/rc.irlp or /etc/rc.local script is not "exiting".

I know in the past, people have added things to this script to start at boot, but added them in a way that if unsuccessful, they do not properly exit.

It could be Echolink, as that is what usually starts right after IRLP.

Dave Cameron

On 2019-10-13 5:06 p.m., Teton Amateur Radio Repeater Association (TARRA) wrote:
Hello Dave,
It just goes to the Node Enabled message and then won't let me do anything else. Now I have found that I can SSH into it. Trying to figure out the IP address places that I need to change.
Mick - W7CAT
Node 3464
----- Original Message -----
From: k9dc
To: IRLP@irlp.groups.io
Sent: Sunday, October 13, 2019 05:39:52 PM
Subject: Re: [IRLP] Exit Out of Boot Up

>
> You shouldn’t need to stop anything. Just login on the local console
as root, and go from there. Nothing trying to start at boot will prevent you from logging in.
>
> -k9dc
>
> > On Oct 13, 2019, at 17:00, Teton Amateur Radio Repeater Association
(TARRA) wrote:
> >
> > Hello,
> >
> > Trying to setup a different node since my other node has stopped
working. Right now I don't have a network setup and running in the node setup. The node boots all the way up to the point of "Node Enabled . . ." and they just stays there. How do I either stop it during the boot process or get out of it when it finishes so I can work on the network settings???
> >
> > Mick - W7CAT
> > Node 3464
> >
>
>
>
>
>
--
Untitled Document

Teton Amateur Radio Repeater Association (TARRA)
 

Hello Dave,

It just goes to the Node Enabled message and then won't let me do anything else. Now I have found that I can SSH into it. Trying to figure out the IP address places that I need to change.

Mick - W7CAT
Node 3464

----- Original Message -----
From: k9dc
To: IRLP@irlp.groups.io
Sent: Sunday, October 13, 2019 05:39:52 PM
Subject: Re: [IRLP] Exit Out of Boot Up

>
> You shouldn’t need to stop anything. Just login on the local console as root, and go from there. Nothing trying to start at boot will prevent you from logging in.
>
> -k9dc
>
> > On Oct 13, 2019, at 17:00, Teton Amateur Radio Repeater Association (TARRA) wrote:
> >
> > Hello,
> >
> > Trying to setup a different node since my other node has stopped working. Right now I don't have a network setup and running in the node setup. The node boots all the way up to the point of "Node Enabled . . ." and they just stays there. How do I either stop it during the boot process or get out of it when it finishes so I can work on the network settings???
> >
> > Mick - W7CAT
> > Node 3464
> >
>
>
>
>
>
--

k9dc
 

You shouldn’t need to stop anything. Just login on the local console as root, and go from there. Nothing trying to start at boot will prevent you from logging in.

-k9dc

On Oct 13, 2019, at 17:00, Teton Amateur Radio Repeater Association (TARRA) <tarra@...> wrote:

Hello,

Trying to setup a different node since my other node has stopped working. Right now I don't have a network setup and running in the node setup. The node boots all the way up to the point of "Node Enabled . . ." and they just stays there. How do I either stop it during the boot process or get out of it when it finishes so I can work on the network settings???

Mick - W7CAT
Node 3464

Teton Amateur Radio Repeater Association (TARRA)
 

Hello,

Trying to setup a different node since my other node has stopped working. Right now I don't have a network setup and running in the node setup. The node boots all the way up to the point of "Node Enabled . . ." and they just stays there. How do I either stop it during the boot process or get out of it when it finishes so I can work on the network settings???

Mick - W7CAT
Node 3464

--