Hi team I have a friend's Ver 3.0 board in my workshop and even with only 5V applied, the COS and DTMF leds are on constantly. Except for this the board is functioning normally. Anyone seen this befor

If you have been on the fence about moving to a PiRLP4 node, I just wanted people to know that I have not been able to buy more Pi4 boards from my supplier, and I have a limited number of PiRLP4's ava

Hi all, Happy Fathers Day. I am running PIRLP node # 7123 I have two questions, 1. I now have the node connected to the internet via cat 6 cable and would like to know the command to turn off the wire

Our node 4000 was off line for a while due to a bad PS., Upon restarting Node seems to work as before. except when I log in from terminal and send a connect command to another node the node connected

Hi Gary, Thanks for the congrats and sorry to hear about your health issues. As far as that the embedded node, you've just asked for help from the group. Maybe Dace C is watching. If anyone can help G

Greetings, Just wanted to mention that this weekend marks my 20th anniversary with IRLP and node 5960, originally node 596. So far so good. Thanks to Dave C, Dave G and all who have helped me thru the

Hi All, I'm aware that the schematics for the V3 interface board seem to be unavailable, but I'm trying to trace a fault on the FET PTT output. I'm driving the PTT line on a Unilab KL470 in parallel w

Hi David: My IRLP node 1041 located in Sicamous BC on frequency 147.540 does not appear on Canada NodeID list. Can you please help get that showing again? PS: hard drive problem which is corrected Ric

We had an hours-long power failure and after the juice came back on my IRLP Nano-Node seems to have an issue fully rebooting and is just displaying LOADING SYSTEM... I was able to control the node fro

Hello I'm KA3TKW Tom in Harrisburg pa. If anyone is interested in joining us Weds evenings at 8 pm est on the 9204 reflector you are welcome to join us. I run a fun digital trivia net where I ask 15 t

Wow, a year ago I was trying to sort this problem and it's still unresolved! When I attempt to connect to Node 6220 I get the following reply "An error has occurred the connection can not be authentic

Node 8094 took a lightning hit and is basically gone... It was connected to the 147.33 repeater here in Columbus, Ohio. We believe the IRLP board is still intact. It's been on the air for MANY years a

Does anyone know if a Alinco DR-140 be used for IRLP? If so, does anyone have a schematic for doing this?

We thought it was a little quiet. There was an error in the configuration and it went unnoticed for a while. If you submitted a ticket to installs@... recently and did not get an automated response, t

Need Teansmitter KT-144A (UHF).

Welcome to Normad Nodes. We developed A intergrated Irlp module with the pi 4. And combined it with the latest Nice Rf 818 vhf or uhf. Fully intergrated and using Oem Irlp Latest software. Along with

Hi All, I've had a Pi node (5196) running fine for a couple of years with no issues untill a couple of days ago I had to remove the radio to reprogram its frequency. Since then, theres no audio coming

https://www.irlp.net/pi/ Gentlemen 1. this page needs updating, it still mentions Yahoo 2. Can the current IRLP-Pi user manual be updated to include a mention to killall dtmf before running alsamixer.

I am in the process of moving the main server, which performs the following functions: - IRLP status page and associated google earth kml, updates, etc - Echo reflector - The irlp.net website / orderi

I use to have my node able to speak time, last in, or out, and other such goodies via a dtmf sequence that I though IRLPVCon added, where can I find these numbers or scrip[ts to re-add them ? i recent