Hi folks. My internet here is a 5 X 1 Broadband in the 5 gig band. Due to various Mother Nature effects we can loose the internet. It can be signal loss between my panel to the tower or backhaul link

I bought a new Alinco DR-135T mkIII to replace my old radio which needed replacement. On the IRLP web site it is posted that the built-in TNC needs to be removed from this unit? I searched around on t

I see you're node has been down for over 80 days, and listed as being on the AllStar network. Have you finally made the decision to switch over to the 2020's protocol and get away from the 1990's IRLP

Is it OK to do the System Updates while connected to the IRLP_VPN? I did an "apt-get update" and "apt-get upgrade" on Buster, and realised that I was still connected through the IRLP_VPN. I think the

Greetings. I'm trying to connect up to a couple of different reflectors today and I'm getting a weird error. The screen (which I've attached) shows things that look pretty normal. But the voice from t

Trying to install remote admin on an old IRLP test node that I have running Centos 4.9 and I am having problems. I know I should upgrade the OS but it is an old VIA motherboard and I have tried to upg

Just corrected all tests via the script. I can ping 8.8.8.8 from the machine but it will not resolve irlp.net. I do have my isp's name server in the resolv.conf file nameserver 24.148.96.18 nameserver

Guy's finally cleaning up the node. I noticed the node was not on the active list. I checked the resolv,conf. I do have 2 name servers in it. I'm using google 8.8.8.8,8.8.4.4 Any ideas?

I would like to run backup_for_reinstall as a cron job every month or so and then gather the tgz with scp from another host. However, backup_for_reinstall is an interactive script on my release of the

If My node is running the older centos do I need to upgrade to the latest os and what is the latest os?

Any one have this problem I can connect to a node but no one can hear me so went to node 9999 to see if my voice would come through but it did not so I unplugged the Pi to reset it but after it came b

Due to changes on my Ethernet connection, I will be loosing my hardwire Ethernet connection to my node. What is the best way to bring it up on WiFi? I know hardwire is preferred, but can't get the cab

I just had to rebuild my config. in my router. Ran ./scripts/update files and got this: new crontab file is missing newline before EOF, can't install. Any ideas? Was thinking of doing a fresh install

I have a PI IRLP node and lost some files Does anyone one have the file 'clear_IRLP_GPIO' ? Its in the path /home/irlp/custom Thanks Ken KC2AYK

Don't need any more.. $100 + shipping IRLP ver 3.0 board with attachments

FYI, For anyone Struggling with why there VirMach OpenVPN service not working! VirMach has installed a new software upgrade to a new KVM visualization and that new change has basically broken all the

Thank you everyone for your help and suggestions. The problem has been solved. Craig Davidson, K1DBX, discovered that my problem was caused by the Virmach KVM upgrade which broke all the scripts that

The fourteenth annual New Years Eve Around the World QSO Party on Reflector 9600 gets under way officially at 10:30 UTC (05:30 US eastern) Tuesday, December 31. It continues (officially) until 10:30 U

Greetings, Okay this is my first attempt at using the GL-MT300N (little yellow box) at my house running the vpn client which is connected to a virtual machine at Virmach that is running openVPN. I hav

Hello I purchased a modified irlp board for a Raspberry pi3. I have it set up except I am having trouble when I perform readinput the dtmf tones are incorrect. When i run audio_level_test it responds