http://stn4651.ip.irlp.net:15426/irlpvmon/ Paul Upham KD1YH node 4651

I am interested in the TM-V71 by Kenwood. It would allow me to purchase a few of these radios, and deploy them in VHF, UHF mode. What IRLP resources pertain to this radio? Does anyone have experience

Is there a fix? or missing file? Paul KD1YH nodes 8433,8581,4651

I guess I don't understand why you aren't looking at the data sheet for the audio amp? Mick - W7CAT Node 3464

We use an EchoPirlp node and have nightly nets in which up to 7-9 stations connect to participate. We also have another repeater system looking to connect IRLP to us at the same time so that their are

Good morning everyon. Does anyone have a copy of the Kenwood TM-281A new version service manual not dated 2011. It is using a 12 pin LA4631vc with 2 mounting studs on side. . We have search high and l

Happy Canada Day to the home of IRLP!!!! Thank you VE7LTD for all that you do for us. 73, Phil N1BOW Nodes 5960 and 4656 AMT MP 113.6 Niantic, CT USA Earth

In our configuration, the node announces "Connected to Echolink, (callsign) connected!". Currently only the first station connected is announced, and subsequent ones are not. The last station leaving

I have new 16GB Industrial flash drives available for older style embedded nodes (based on the VIA ME/ML6000 or LN10000EG). I know a number of people were looking for them. I have 4 available at this

Good afternoon Has anyone hooked a Kenwood TM-281a to pi-irlp node? Is there any suggestions? I have a DB9 female cable and hole drilled into back of of the radicand got the pinout of db9 too. Need so

Hi Guys, I discovered my embedded node (#3417) wasn't putting out audio. The DTMF is working fine. I can connect but not heard. Audio coming back sounds great but I can't be heard. I did the troublesh

http://10.0.0.13:15426/irlpvmon/ This site can’t be reached 10.0.0.13 refused to connect. http://10.0.0.13:15426/control/index.php 10.0.0.13 refused to connect. paul kd1yh 4651

Is there something else i need to do for RA to work? I downloaded the script but cannot get the irlp.net/redirect to work. Do I need to change a port location / permissions somewhere? Paul Kd1YH rebui

Thanks so much Dave ! This helps a lot , again thank you Richard Szajkowski VA3 RZS VA3ZJ VE3BTE

Trying to find the IP address of my node I am away from the system and would like to know the static public up address of my node Node 2120 Thanks Richard Szajkowski VA3 RZS VA3ZJ VE3BTE_

Good day, At some point and in an unknown way the host name of node 3248 has been changed to 3249. Troubleshoot-IRLP runs without errors. Node 3248, however, has a one way audio issue that I have been

I currently have a simplex node for IRLP, but would like to see if I can setup a Reflector for all to use?

I have a deb 7 jessie node that has the openvpn installed. The openvpn work fine when booted and gets the 44. ip and works normally for a day or so. When the provider releases the wan ip it appears th

Craig - K1BDX - Node 8724 wrote: Forgive me for somewhat changing the subject, but it sounds like you'd know... If someone wants to create a new special-purpose experimental reflector from scratch, wh