Can anyone here recommend a good, low-cost, US based VPS provider OTHER THAN VirMach where I can run a VPN server under Ubuntu? I've been happily using VirMach for several years, but lately have becom

Our radio club replaced our IRLP boards with the PIRLP boards, so we now have 4 V3 IRLP boards for sale. They include the V3 board, DB25 M/F cable and the 9 pn header that attaches to the board. Small

Hi Group, We just lost our internet at the repeater site where our node is located. I've restored with a cell modem but no capability to port forward. is there a solution to allow IRLP behind a firewa

I purchased an IRLP node from Cameron and radio. Many hams connect directly to the NASA Communications 24x7 that transmit ISS, launches, etc. I have been going thru their allstar nodes and would like

Finally getting around to updating node 5750 and I attempted to install the 13.08 iso and was unable to. Afterwards when I try to connect to a node my computer says I'm connected but I get the bells a

I just received a question posed to the owner of node 2040. It is actually the Ottawa Amateur Radio Club but I am the point man for it. Since there is no address in the "reply-to" so I can't even repl

When IRLP changed to HTTPS, a number of things broke in older OS's that could not handle it. As such, the URL status-update.irlp.net does NOT force https, and thus can be used in place of status.irlp.

Hi team I have a friend's Ver 3.0 board in my workshop and even with only 5V applied, the COS and DTMF leds are on constantly. Except for this the board is functioning normally. Anyone seen this befor

If you have been on the fence about moving to a PiRLP4 node, I just wanted people to know that I have not been able to buy more Pi4 boards from my supplier, and I have a limited number of PiRLP4's ava

Hi all, Happy Fathers Day. I am running PIRLP node # 7123 I have two questions, 1. I now have the node connected to the internet via cat 6 cable and would like to know the command to turn off the wire

Our node 4000 was off line for a while due to a bad PS., Upon restarting Node seems to work as before. except when I log in from terminal and send a connect command to another node the node connected

Hi Gary, Thanks for the congrats and sorry to hear about your health issues. As far as that the embedded node, you've just asked for help from the group. Maybe Dace C is watching. If anyone can help G

Greetings, Just wanted to mention that this weekend marks my 20th anniversary with IRLP and node 5960, originally node 596. So far so good. Thanks to Dave C, Dave G and all who have helped me thru the

Hi All, I'm aware that the schematics for the V3 interface board seem to be unavailable, but I'm trying to trace a fault on the FET PTT output. I'm driving the PTT line on a Unilab KL470 in parallel w

Hi David: My IRLP node 1041 located in Sicamous BC on frequency 147.540 does not appear on Canada NodeID list. Can you please help get that showing again? PS: hard drive problem which is corrected Ric

We had an hours-long power failure and after the juice came back on my IRLP Nano-Node seems to have an issue fully rebooting and is just displaying LOADING SYSTEM... I was able to control the node fro

Hello I'm KA3TKW Tom in Harrisburg pa. If anyone is interested in joining us Weds evenings at 8 pm est on the 9204 reflector you are welcome to join us. I run a fun digital trivia net where I ask 15 t

Wow, a year ago I was trying to sort this problem and it's still unresolved! When I attempt to connect to Node 6220 I get the following reply "An error has occurred the connection can not be authentic

Node 8094 took a lightning hit and is basically gone... It was connected to the 147.33 repeater here in Columbus, Ohio. We believe the IRLP board is still intact. It's been on the air for MANY years a

Does anyone know if a Alinco DR-140 be used for IRLP? If so, does anyone have a schematic for doing this?